Five Things To Note When Using A Fiber Laser Cutting Machine!

Five things to note when using a fiber laser cutting machine

There are many things to pay attention to when using a fiber laser cutting machine. Here are five of the most useful tips to share with you. I hope it will be of great help to you when using a fiber laser cutting machine.

1. The laser cutting head is a vulnerable item on the laser cutting machine. Long-term use will cause the laser cutting head to be damaged. When replacing the lens, pay attention to replacing it in a dust-free environment.

2.Use a vacuum cleaner to remove dust and dirt inside the laser cutting machine once a week, and all electrical cabinets should be closed tightly to prevent dust.

3. Check the straightness of the fiber laser cutting machine track and the verticality of the machine every six months, and perform maintenance and debugging in time if abnormal. If this is not done, the cutting effect may not be very good, the error will increase, and the cutting quality will be affected. This is the top priority and must be done.

4. The guide rails of the fiber laser cutting machine should be cleaned regularly to remove dust and other debris to ensure the normal operation of the equipment. 

The racks should be wiped regularly and lubricated to ensure lubrication without debris.

The guide rails should be cleaned and lubricated regularly, and the motor should also be cleaned and lubricated regularly, so that the machine can move better during operation, cut more accurately, and the quality of the cut products will be improved.

5. Check the steel belt of the fiber laser cutting machine frequently and make sure it is tightened. Otherwise, if there is a problem during operation, it may hurt people, and even cause death. The steel belt may seem like a small thing, but it is still a bit serious if there is a problem.

The fiber laser cutting machine needs to be inspected and repaired regularly. 

If there is deformation or other forms, you should know that the laser cutting head is a little damaged and needs to be replaced. 

Failure to replace it will affect the cutting quality and increase costs. 

Some products may also need secondary processing, which will reduce production efficiency.